Using The Pool Cleaner; Setup - Maytronics M1 User Instructions

5. USING THE POOL CLEANER

5.1 Setup

Before using the Pool Cleaner for
the first time, perform the following
steps:
1
5.1.3 Attach the floating cable to the power
supply by inserting it with the notch on the
connector (1), lined up with the groove in
the socket on the power supply, and turning
clockwise (2).
4
5.1.1 Position the power supply so that it is
approximately in the middle of the long side
of the pool at a distance of 3m /10ft.
Unwind the cable and stretch it out completely so that
5.1.2
it has no kinks.
2
5.1.4
OFF position.
Robotic Pool Cleaner M1 / M1B / MT1
3m/10ft
Plug in the power supply and leave it in the
User Instructions
|