Table of Contents
Advertisement
Quick Links
EN
Dolphin Hybrid RS 1 -
Suction Pool Cleaner
Operating Instructions
Contents
❙ ❙
Parts ..................................................................2
Warnings ...........................................................3
Specifications ...................................................3
Water conditions ..............................................3
Pool Preparation ...............................................3
Setup ................................................................3
Cleaning Process ..............................................6
Clean the Leaf Canister ....................................6
Removal from the Pool and Storage ................7
Troubleshooting ...............................................7
Dolphin Hybrid RS 1 - Suction Pool Cleaner
Operating Instructions
|
1
Advertisement
Table of Contents
Related Manuals for Maytronics Dolphin Hybrid RS 1
Summary of Contents for Maytronics Dolphin Hybrid RS 1
-
Page 1: Table Of Contents
Dolphin Hybrid RS 1 - Suction Pool Cleaner Operating Instructions Contents ❙ ❙ The Dolphin Hybrid RS 1 Suction Cleaner ..2 Parts ..............2 Warnings ............3 Specifications ...........3 Water conditions ..........3 Pool Preparation ..........3 Setup ..............3 Cleaning Process ..........6 Clean the Leaf Canister ........6 Removal from the Pool and Storage ....7... -
Page 2: The Dolphin Hybrid Rs 1 Suction Cleaner
(Drawing A). If needed, you can purchase additional hose sections from your supplier. Replacement parts are also available. Skimmer Pool Two extra hose sections Dolphin Hybrid RS 1 - Suction Pool Cleaner Operating Instructions... -
Page 3: Warnings
Warnings ❙ ❙ • Do not enter the pool while the cleaner is working. • Maytronics is not responsible for any damage to the external pump. CAUTION Specifications ❙ ❙ • Weight – 4.5 kg / 9.9lb • Hose length – 10 Hoses of 1.17m / 3.83ft • Required water flow –... - Page 4 If the indicator remains outside the satisfactory range, correct unsatisfactory flow according to the instructions in the following table. After each action, check flow with the Flow Indicator. If flow is still unsatisfactory, proceed to the next action. Dolphin Hybrid RS 1 - Suction Pool Cleaner Operating Instructions...
- Page 5 (Drawing F). Make sure that the hose is firmly connected. Ensure that there is a small space between the locknut and the pipe. Realese the Dolphin Hybrid Cleaner in the pool. Restart the pump Dolphin Hybrid RS 1 - Suction Pool Cleaner Operating Instructions...
-
Page 6: Cleaning Process
Connect the Leaf Canister and hose sections under the water. Make sure to remove trapped air from the Leaf Canister. Turn the pump ON. Canister Canister Leaf & debris Filter Dolphin Hybrid RS 1 - Suction Pool Cleaner Operating Instructions... -
Page 7: Removal From The Pool And Storage
If a problem does occur, try to determine the cause. Often, the solution is already part of the standard operating instructions in this booklet. If you cannot solve the problem easily, contact your supplier. Dolphin Hybrid RS 1 - Suction Pool Cleaner Operating Instructions... - Page 8 Air bubbles at the exit of the water from the 1. Ensure that the hoses are firmly fastened. jets, or a noise of air suction 2. Ensure that the Leaf Canister lid is firmly closed. Dolphin Hybrid RS 1 - Suction Pool Cleaner Operating Instructions...