Switching portrait or landscape
view automatically
You can set the screen orientation to switch
between landscape and portrait view
automatically according to the terminal
orientation.
Drag the status bar downwards.
1
[Auto rotate].
2
When the setting is enabled,
・
appears.
❖ Information
Even when you change the orientation of the
・
terminal, the screen may not change to landscape
view depending on the screen such as Home screen,
etc.
While charging with the desktop holder, the screen
・
view may change regardless of the auto rotate
screen setting.
Changing orientation of the terminal in nearly
・
horizontal state against the ground does not switch
to portrait view/landscape view automatically.
Setting silent mode
Drag the status bar downwards.
1
[Sound].
2
Tap
to activate silent mode
・
(vibration) and tap
mode (mute). Tap
mode.
❖ Information
Alternatively, press and hold
・
u
second
Tap
/
Press and hold the volume down key to set vibrator
・
and press the volume down key while the vibrator is
set to set mute. On the lock screen, during a call, in
some applications such as camera and WALKMAN,
silent mode cannot be set even if the volume down
key is pressed.
Setting the terminal to silent mode does not mute
・
sounds for shutter, playback of video or music, alarm,
dialpad operation sound during a call or sound
emitted when [End call] is tapped, etc.
While silent mode is set, adjusting volume for
・
"Ringtone & notifications" from "Volumes" (P.153) in
Sound or turning up the volume by pressing the
volume up key cancels silent mode.
Before Using the Terminal
to activate silent
to cancel silent
P
for over a
/
to switch silent modes.
41