Charging With A Pc - Sony Docomo Xperia Z1fSO-02F Instuction Manual

Charging with a PC

When using Micro USB Cable 01 (optional) for
charging, do the following procedures.
Opening/closing microUSB jack cover (P.23)
･
Notification LED
USB plug
Open the microUSB jack cover and
1
insert the microUSB plug of the
microUSB cable horizontally into
the microUSB jack of the terminal
with the engraved side (
facing up.
Insert the USB plug of the
2
microUSB cable into a USB port of
a PC.
Notification LED of the terminal turns
･
on (P.42).
When "Install software" screen appears
･
on the terminal, tap [Skip].
3
4
5
microUSB plug
microUSB cable
❖ Note
Installation of an MTP driver to a PC is required when
･
charging the battery with a Microsoft Windows XP
PC, because "USB connection mode" (P.176) is set to
"Media transfer mode (MTP)" by default. Install
)
Windows Media Player 10 or later to install an MTP
driver.
Check the connecting direction to connect correctly.
･
Wrong connection may cause damage.
When a screen for new hardware
･
detection etc. appears on the PC, select
" (Cancel)".
キャンセル
When the charging is complete,
remove the USB plug of the
microUSB cable from the USB port
of the PC.
Remove the microUSB plug of the
microUSB cable evenly from the
terminal.
Close the microUSB jack cover,
firmly press it and make sure that
there are no gaps between the
terminal and cover.
Before Using the Terminal
35