Table of Contents
Advertisement
Tap and enter all other
5
information required by your
network operator.
u
[Save].
6
❖ Information
Do not change the MCC/MNC. If you change MCC/
･
MNC to other than the default value (440/10), the set
new APN does not appear on the APNs screen. When
the set new APN does not appear on the APNs
u
screen,
Make APN settings with "Reset to
default" or "New APN" again.
Note that, when using the prediction conversion by
･
one-byte alphabet entry mode (English mode) with
mark in "Auto space" (P.70) on Japanese keyboard
settings screen, spaces may be entered automatically
when the prediction option is confirmed. In this case,
delete spaces.
Initializing an access point
From the Home screen,
1
u
[Settings]
u
networks]
[Access Point Names].
u
[Reset to default].
2
u
u
[More...]
[Mobile
sp-mode
sp-mode is ISP for NTT DOCOMO
smartphone. In addition to accessing
Internet, you can use the mail service using
the same address as i-mode mail
(@docomo.ne.jp), etc. sp-mode is a service
requiring subscription. For details on sp-
mode, refer to NTT DOCOMO website.
Using tethering function
Use tethering function to enable the terminal
to use as modem to allow USB compatible
devices, wireless LAN devices or Bluetooth
devices to access the Internet.
❖ Information
Packet communication charge when using tethering
･
varies depending on the charging plan you use.
Subscription of packet flat-rate service is highly
recommended.
For details on usage charge, see the following
･
website.
http://www.nttdocomo.co.jp/english/
When the docomo mini UIM card is not inserted,
･
mobile data communication is disabled, or the
terminal is out of service area, USB tethering or Wi-Fi
tethering, and Bluetooth tethering using mobile
network are not available.
Settings
148
Advertisement
Table of Contents
