Unfold the power plug of the AC
2
adapter and insert it into an outlet.
Install the terminal to the Desktop
3
Holder and move it left or right
until it clicks.
When the terminal and the Desktop
・
Holder are correctly connected, the
notification LED of the terminal turns
on (P.42).
When charging is complete,
4
holding the desktop holder, lift the
terminal up to remove.
Remove the power plug of the AC
5
adapter from the power outlet.
Remove the microUSB plug of the
6
AC adapter from the desktop
holder.
Attaching/Removing the
attachment
Attachment 35A
Attaching
■
Check the shape of front/back of
1
the attachment and the attaching
part of the desktop holder, then fit
the attachment with the desktop
holder.
Firmly press the attachment
2
straight and make sure that there
are no gaps between the
attachment and the desktop
holder.
Removing
■
Put your fingertip into the groove
1
on the one side of the attachment,
lift it up at a slant while pressing
the desktop holder, then remove it
( ).
Before Using the Terminal
Depressed area
Attachment 35B
33