Table of Contents
Advertisement
Set docomo mini UIM card into the
2
tray with IC facing up ( ), then
insert the tray with the card and
press it all the way into the
terminal.
Make sure the orientation of the corner
･
cut and direction to insert.
Corner cut
IC
Tray
Close the docomo mini UIM card
3
cover, firmly press
make sure that there are no gaps
between the terminal and cover.
Removing docomo mini UIM
card
1
2
docomo miniUIM card
parts and
3
Open the docomo mini UIM card
slot cover, then hook your
fingertip on the projection part of
the tray to pull the tray straight
out to remove it from the terminal.
Remove the docomo mini UIM card
from the tray ( ), then insert the
tray into the terminal and press it
straight all the way.
Be careful about the direction to insert
･
of the tray.
Tray
Close the docomo mini UIM card
slot cover, firmly press the cover
and make sure that there are no
gaps between the terminal and
cover (P.30).
Before Using the Terminal
30
Advertisement
Table of Contents
