Map/GPS
■
Cannot set AUTO-GPS service
information.
Check if the battery level is low and AUTO-
・
GPS function stops.
If AUTO-GPS stops due to "Low-power
operation settings", AUTO-GPS service
information cannot be set. In this case, set
"Low-power operation settings" to "Not
suspend" or charge the battery.
P.158
Check if "AUTO-GPS operation settings" is
・
marked.
P.158
→
Error messages
No service
●
The terminal is out of service area, or the
・
received signal is too weak. Move to a
location where radio signal can be
reached.
The docomo mini UIM card is not working
・
properly.
Insert the docomo mini UIM card in
another terminal. If this works, it is
probably the terminal that is causing the
problem. In this case, contact "Repairs" on
the last page of this manual (in Japanese
only).
Removing and inserting docomo mini
UIM card may solve the problem.
Mobile network not available
●
Install docomo mini UIM card correctly
(P.29), then move to a location where radio
signal reaches.
Normal calls are restricted by access
●
control.
Appears when normal voice call service is
hard to receive because communication
lines are busy.
Emergency calls are restricted by access
●
P.31,
→
control.
Appears when emergency voice call service
is hard to receive because communication
lines are busy.
Calls are restricted by access control
●
Appears when normal/emergency voice
call service is hard to receive because
communication lines are busy.
SIM card is locked
●
Enter your PIN code (P.161) correctly.
SIM card is PUK-locked
●
Enter your PUK (Personal Unblocking Key)
(P.161) correctly.
PIN lock disable code is locked.
●
PIN lock disable code is locked. Please
contact a docomo Shop.
Appendix/Index
198