Setting USB tethering
From the Home screen,
1
u
[Settings]
[Tethering & portable hotspot].
Connect the terminal to the PC
2
with a USB compatible PC with
Micro USB Cable 01 (optional) etc.
(P.35).
When you connect Micro USB Cable 01
・
(optional) etc. for the first time, the
driver software for the terminal is
installed to a PC. Wait for a while until
installation is completed.
When "Install software" screen appears
・
on the terminal, tap [Skip].
[USB tethering].
3
Confirm "Details"
4
❖ Information
System requirements (OS) for USB tethering are as
・
follows.
- Microsoft Windows 8/8.1
- Microsoft Windows 7
- Microsoft Windows Vista
- Microsoft Windows XP
- Linux
* For Microsoft Windows XP, installation of PC
Companion is required.
During USB tethering, the terminal storage cannot
・
be mounted with a PC.
USB tethering can be used with Wi-Fi tethering or
・
Bluetooth tethering at the same time.
u
u
[More...]
u
[OK].
*
Setting Wi-Fi tethering
From the Home screen,
1
u
[Settings]
[Tethering & portable hotspot].
[Portable Wi-Fi hotspot].
2
Confirm "Details"
3
❖ Information
If Wi-Fi tethering starts while connecting to Wi-Fi
・
network or the terminal and DLNA device are
connected via Wi-Fi network, Wi-Fi network is
disconnected. Wi-Fi network is automatically
connected when Wi-Fi tethering ends.
Wi-Fi tethering can be used with USB tethering or
・
Bluetooth tethering at the same time.
Setting up a portable Wi-Fi hotspot
You can use the terminal as a Wi-Fi access
point to connect up to 10 wireless LAN
devices to the Internet simultaneously.
From the Home screen,
1
u
[Settings]
[Tethering & portable hotspot].
[Portable Wi-Fi hotspot
2
u
settings]
[Configure Wi-Fi
hotspot].
Enter a network SSID of the Wi-Fi
3
access point to set.
"Xperia Z1 f_XXXX" is set by default.
・
u
u
[More...]
u
[OK].
u
u
[More...]
Settings
149