Camera; Camera Setup - Phylink Bullet HD User Manual

Section 3 - Advanced Setting

3.2.1 Camera Setup

From the home page click
and password. Click on
image and audio parameters of the camera.

Camera

Camera Setup
Stream Setup
OSD Setup
Night Vison Setup
[Enable privacy mode]
for protecting your privacy.
[Disable power LED light]
[Light frequency]
frequency in the country of use.
For UK this would be 50Hz. For US this would be 50Hz.
[Microphone] Turn on/off the built-in microphone.
[Mic volume] Adjusts the volume of the microphone from 0~14 where 0 is the
lowest.
Click Apply to confirm your settings.
3.2 Camera
setting button and enter the administrator user name
Camera Setup
The video of camera display always a static colored stripes
The Status LED will been power off.
Two options: 50Hz & 60Hz. Set according to the mains
Camera Setup
System:
Enable privacy mode
Disable power LED light
Camera:
Light frequency:
Enable image mirror
Enable image flip vertical
Microphone:
Volume:
PHYLINK Bullet HD User Manual
under the title Camera
60Hz
Enable Disable
8
Apply
to change the
47