Phylink Bullet HD User Manual page 44

Section 2 - Installation
Wireless Setup
Wireless:
SSID:
Mode:
(Select infrastruture mode using wireless router.)
Security mode:
Encryption type:
WPA Key:
Re-type WPA Key:
Do NOT change any of the settings ( SSID, Mode, securitry mode, Encryption type )
Enter the " WPA Key
WPA Key also known as wireless key or passwor
Note:
Click the " Apply " button and then "Wireless setup accepted successfully" message will
be displayed.
Now you should click the "
was entered correctly.
If the test reports "Success!" you can remove the network cable and the camera should
work through wireless network after a short delay.
Enable
TP-LINK_4B8C68
Infrastructure
WPA2PSK
AES
".
Test " button to check if all the information about the wireless
PHYLINK Bullet HD User Manual
Live View Wizard
Disable
Apply Test
System Support
Camera
Network
Wireless Setup
TCP/IP Setup
Search...
DDNS Setup
UPNP Setup
P2P Setup
Storage
Task
Tools
d and they are case sensitive.
Reboot
44