Record To Storage On Alarm - Phylink Bullet HD User Manual

Section 3 - Advanced Setting

3.5.3.9 Record to storage on alarm

[Record from] Select the stream from which it should record.
[Post-recording time]
keep recording video after motion stops. If there is any motion within
this time the camera will keep recording until there is no motion for
the duration of this parameter. It can be from 5 seconds to 24 hours.
[Split duration]
If the recording goes on for longer than this parameter the camera
will split the video into a number of files.
[Record thumbnail]
[Record file name]
Click Apply
The number of seconds that the camera should
This specifies the maximum duration of one file.
Enable or disable thumbnail.
Name of record file are saved to.
to confirm your setting.
PHYLINK Bullet HD User Manual 80