Hardware Installation; Connecting The Camera; Microsd Card Installation - Phylink PLC-325PW Quick Install Manual

2.1 Connecting the camera

Camera cable
Connect the camera to your router using the network cable. Using the included
power adaptor, plug one end into the Power Connector and plug the other end
into a power outlet.
Once connected and powered, the status indicator LED should illuminate a
constant green.
NOTICE
Please note that for initial setup, you need to connect the camera directly to your
router with a network cable. You cannot connect wirelessly to the camera without
first setting it up via a network cable.
You can set up the wireless via the App or web browser quickly. Instructions for
wireless setup are included later, inside this guide.

2.2 MicroSD card installation

The Micro SD card is not included in packages. Adding a Micro SD card to your
camera will allow you to record footage and motion alerts directly to the MicroSD
card for future review. The recorded files may be reviewed remotely on your
phone / computer when using Phylink app / software.
For a new SD card which has never been used or formatted, you can use the
camera's format tool to format it. To learn how to format the SD card, please refer
to the related technical articles on the Phylink support website.
4

2. Hardware Installation

DC power adaptor
Network cable
Router