Phylink Bullet HD User Manual page 92

Section 4 - Troubleshooting
Forget the IP address of network camera
1. Use Phylink Camera Live.
2. Use Phycam App.
3. Reset your Network to default IP address.
Note that all settings will be restored to factory default.
Forget the password to access the setting interface
Initialize the network camera by pressing the
configuration settings will be lost.
Why we see strips in the videos
Because of the electricity. Some country like USA is 60Hz, yet Europe is 50Hz.
For example: In USA, the camera should choose 60Hz, otherwise we will see
strips in the videos.
The camera is producing noisy images
The camera is producing noisy images. How can I solve the problem?
The video images might be noisy if the Network Camera is used in a very low light
environment.
RESET
PHYLINK Bullet HD User Manual
button. Note that all
92