Advanced Setting; Network Camera Setting Interface - Phylink Bullet HD User Manual

Section 3 - Advanced Setting
IMPORTANT! - Advanced setting via web browser apply to the users who have
fundamental knowledge about Internet and whose cameras are set in
Local Area Network with their PC.
You do not need this way unless for some advanced function. You can set up
a camera on a smart phone with sample steps.

3.1 Network Camera Setting Interface

Click on Setting button from the home page. When connecting the camera for the
first time or after resetting it to its default settings, the setup interface start page
below will load. It is recommend that you change the admin password in order to
avoid unauthorized access to the camera. To do this follow the instructions by
clicking on the underlined link "
page.
Type the password in both fields then click Save. Please take note of the password.
If you forget the password, the camera will have to be reset to its default settings in
order to gain access to the settings page and this will also reset all other settings
you may have changed.
Edit User
here " to access administrator password editing
CAMERA SETTINGS
User name:
Password:
Re-type password:
PHYLINK Bullet HD User Manual
Live View Wizard
Admin
Back
Save Delete
System Support Reboot
Camera
Network
Storage
Task
Tools
45