Panasonic WJ-HD309A Network Set Instructions page 39

Digital disk recorders
Hide thumbs Also See for WJ-HD309A:
Table of Contents

Advertisement

Setup items
I Date Format
Select a date format to be displayed from the following.
(Example for April 1, 2004)
YY.MM.DD:
04.4.1
MMM.DD.YY:
APR.1.04
DD.MMM.YY:
1.APR.04
I Time Format
Select a time format to be displayed from the following.
(Example for 3 o'clock in the afternoon)
24 h: 15:00:00
12 h: 3:00:00 PM
I Time & Date
Adjust the current time and date.
Enter numbers in order for the year, month, day, hour
and minute, and then click the [SET] button.
Important:
Recording will stop for around 4 seconds just after
setting the clock.
I Auto Adjust Time
Select a method of auto clock adjustment from the fol-
lowing.
When "MASTER" is selected, signals will be supplied
from the ALARM/CONTROL connector to inform the
clock of the MASTER unit (see below) at a set time.
OFF: Does not adjust time automatically.
SLAVE: Receives a signal from the MASTER unit and
adjusts the clock.
MASTER: Supplies a from the ALARM/CONTROL con-
nector on the rear panel signal to the other connect-
ed devices and the other devices will adjust their
clocks with reference to the clock of this unit.
Important:
• Recording will not be performed for around 4 sec-
onds when changing the present time (accurate
within ±5 seconds) using the time adjustment input
(pin no.20).
• The clock will not be adjusted automatically during
the post-event recording or emergency recording.
I Time
When "MASTER" is selected for "Auto Adjust Time", set
the clock for a signal to be supplied from the ALARM/
CONTROL connector (time adjustment I/O, pin. no. 20)
of the ALARM/CONTROL connector on the rear panel
of the unit.
When "SLAVE" is selected, set the time when the unit
receives a signal from the MASTER unit and adjust the
clock.
Important:
When "MASTER" or "SLAVE" is selected, it is
required to apply the same time to the MASTER unit
and the SLAVE unit to adjust the clock automatical-
ly.
I Summer Time (Day Light Savings)
Perform the settings for summer time from the following.
OUT: Does not apply summer time.
IN: Applies summer time.
AUTO: Applies summer time automatically in accor-
dance with the settings for switching to summer time
(Refer to the following).
39

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wj-hd316a

Table of Contents