Panasonic WJ-HD309A Network Set Instructions page 70

Screenshot 3
The timetable of the selected day of the week will be
displayed.
Notes:
• To copy a timetable that is set for a different day of
the week, click the [INPUT] button of "Copy the
Other Time Table" at step 3.
• To set for two or more days of the week, repeat
steps 2 to 4.
Step 3
Perform the settings for each item.
Perform the settings of the following item for each time
zone.
[START]
Set the start time of the time zone.
[END]
Set the end time of the time zone.
[REC PROG]
Select the desired "REC PROG".
[EVENT PROG]
Select the desired "EVENT PROG".
[FTP SEND BY PERIODIC TIMER]
Perform the settings of "Ftp send by periodic timer" on
"Network FTP Setup" of the "Comm" menu (page 99)
first, and select ON or OFF to determine whether or not
to send images to the FTP server periodically.
70
Note:
It is possible to browse image files (filename.go1)
transmitted to the FTP server using the viewer soft-
ware. Refer to the Network Operating Instructions
(PDF) for descriptions of how to operate the viewer
software.
[ERROR REPORT MAIL]
Select ON or OFF to determine whether or not to send
an error mail when a problem occurred. Refer to page
112 for further information about error mail.
[WARNING REPORT MAIL]
Select ON or OFF to determine whether or not to send
an error mail when the available hard disk space of the
copy area or an external recording disk (DVD-RAM disk,
DVD-R disk, CD-R disk) is less than the set level, or
when the disk has no more available disk space. Refer
to page 112 for further information about error mail.
Note:
Refer to page 101 for descriptions of how to use the
mail function such as the settings of the mail server
address and the mail address of the recipient.
[NW BANDWIDTH CONTROL]
Select a rate for transmission to the FTP server from the
following.
OFF/32 kbps/64 kbps/128 kbps/256 kbps/512 kbps/
1 024 kbps/2 Mbps/5 Mbps/10 Mbps
Step 4
Click the [SET] button after completing the settings, and
close the window (the timetable of the selected day of
the week) by clicking the [×] button at the top right of the
window.