Panasonic WJ-HD309A Network Set Instructions page 68

Setup items
I Mode
Perform the settings for the action mode. Refer to the
Network Operating Instructions (PDF) for further infor-
mation about each mode.
ACT DET (Activity Detection Mode): Performs only
recording, writing an event log and camera move-
ment to a preset position at an event occurrence.
Other event actions will not be performed.
ALARM (Alarm Mode): Performs every event action
according to the settings.
OFF: Performs only recording of the event log. Other
event actions will not be performed.
I Camera Action
Perform the settings for camera action for each camera
channel at an event occurrence.
REC CH: Select ON or OFF to set whether or not to
record images from the selected camera channel.
AUTO COPY: Auto copy is the function to copy record-
ed images automatically onto the copy area of the
hard disk or the DVD-RAM disk. Select ON or OFF
to enable or disable the auto copy function.
PRESET: Determine whether or not to move the select-
ed camera to a preset position registered in
advance. Select a preset number registered in
advance. When "- -" is selected, a camera will not
move to a preset position.
Important:
• When "OFF" is selected for "Auto copy" of "Basic
Setup" on "System", the auto copy function will not
work even though "ON" is selected for this setting.
Select "HDD", "COPY1" or "COPY2" for "Auto copy".
• Images recorded (by pre-event recording) in the pre-
recording area on the hard disk will not be copied
automatically.
68
I Serial Notice
Select ON or OFF to determine whether or not to notify
an event occurrence using PS·Data (or RS232C).
I Alarm Mail Notice
Select ON or OFF to determine whether or not to send
an alarm mail at an event occurrence.
Refer to page 101 for descriptions of how to use the
mail function such as the settings of the mail server
address and the mail address of the recipient.
I FTP Alarm Sending
Select ON or OFF to determine whether or not to send
images to the FTP server at an event occurrence.
Important:
• Refer to the provided Operating Instructions (book)
or the Network Operating Instructions (PDF) for fur-
ther information about the actions at an event occur-
rence.
• It is possible to browse image files (filename.h3r)
transmitted to the FTP server using the viewer soft-
ware. Refer to the Network Operating Instructions
(PDF) for descriptions of how to operate the viewer
software.