Panasonic WJ-HD309A Network Set Instructions page 29

Setup items
I Line Speed
The following are available for "Line Speed".
AUTO: Line speed will be applied automatically.
10-HALF: 10 Mbps half duplex
10-FULL: 10 Mbps full duplex
100-HALF: 100 Mbps half duplex
100-FULL: 100 Mbps full duplex
Note:
When the setup menu is closed after changing the
line speed, the unit will automatically restart.
I HTTP Port Number
Specify the HTTP port number to be used to transfer
images from this unit. It is not necessary to change it for
normal use.
Notes:
• Depending on the network settings of the LAN or
Internet service provider, network communication
may not be established if the http port number has
been changed.
• The following port numbers are unavailable for the
HTTP port number:
20, 21, 23, 25, 42, 67, 68, 69, 79, 105, 110, 123,
161, 162, 10000, 10001, 10002, 10003, 10004,
10005, 10006, 10007
I DHCP
Select ON or OFF for whether or not to use the DHCP
server. When obtaining IP addresses, net mask and a
gateway address from the DHCP server, set to ON.
If not, set to OFF and enter those addresses manually.
ON: Uses the DHCP server.
OFF: Does not use the DHCP server.
I IP Address
Enter an IP address when OFF is selected for "DHCP".
For this unit, enter 4 units from the decimal numbers (0-
254).
I Subnet Mask
Enter a subnet mask according to the network configu-
ration when OFF is selected for "DHCP".
I Gateway
Enter the gateway address according to the network
configuration when OFF is selected for "DHCP".
29