Brady Network Cards; Led Light; Supported Networks - Brady BBP 31 User Manual

Brady Network Cards

LED Light

Color
Solid Green
Blinking Orange
Blinking Green
Solid Red
Blinking Red

Supported Networks

NET-BT-WIFI-LAN
NET-WIFI
NET-BT
NET-LAN
®
BBP 31 Sign & Label Printer User's Manual
LED Light
The changing colors of the LED light on the Brady Network Card signifies the
following:
Card is functioning normally, status is OK.
The firmware is corrupted and it needs to be upgraded. Use the
Brady Network Card Configuration Utility to upgrade the firmware
(see "Firmware Upgrade/Factory Reset" on page 2-52 for
information on downloading new firmware.)
Firmware upgrade is in progress.
Card failure. There is no communication between the Brady
Network Card and the printer. Contact your system administrator.
An error is detected in the current operation of the Brady Network
Card. Check the current operation.
The name on the barcode label of your network card indicates which networks the
specific card supports.
Name
Bluetooth, WiFi, and Ethernet
WiFi and Bluetooth ONLY
Bluetooth ONLY
Ethernet ONLY
Supported
Networks
Status
Networks Supported
Brady Network Cards
Supported Networks
2-11