Dust Cleaning - Brady BBP 31 User Manual

Dust Cleaning

®
BBP 31 Sign & Label Printer User's Manual
Dust generated by media cuts can accumulate in the unit. If a significant amount
of dust is built up, clean the unit using this procedure.
Materials Required
®
• BBP 31 Cleaning Kit (Cat # B31-CCT)
• Isopropyl Alcohol
• Compressed Air Bottle, purchased locally (e.g., HOSA AIR-464 Gear Duster)
To clean dust from the unit:
CAUTION!
Always wear safety glasses when using compressed air.
1. Remove power and media from the printer (see Removing Power and Media
from Printer on page 1).
2. Using compressed air, spray all visible areas inside the printer to remove
accumulated dust.
3. Using a cloth moistened with isopropyl alcohol, wipe any remaining dust from
inside the printer.
4. Wipe exterior cover and frame of printer for dirt and residue.
Printer Maintenance
Cleaning the Printer
8-9