Table of Contents
Advertisement
APCI-7501
5.2
Installing the software
The CD contains:
- ADDIREG for Windows NT 4.0 and Windows 95,
- Standard software for the ADDI-DATA boards:
- 16-bit for MS-DOS and Windows 3.11
- 32-bit for Windows NT/95.
5.2.1
Installation under MS-DOS and Windows 3.11
To install the board under MS-DOS, the "ADDI-DATA software driver" is
available on request.
5.2.2
Installation under Windows NT / 95
- Select the directory PCI7501\32bit\Disk1.
- Start the set-up program "setup.exe" (double click)
- Select one of the 3 parameters
1- typical
2- compact
3- custom
Proceed as indicated on the screen and read attentively the "Software License"
and "Readme".
In "custom", you can select your operating system.
The installation program gives you further instructions.
5.3
Configuration of the board with ADDIREG
The ADDIREG registration program is a 32-bit program for Windows NT 4.0
and Windows 95.
With this program, the user can registrate all hardware information which are
necessary for the management of ADDI-DATA PC-boards.
5.3.1
Program description
IMPORTANT!
Insert first the ADDI-DATA board you want to registrate before you
start the ADDIREG program.
Once the board is installed, the registration can be tested.
By call-up of the program the following screen is displayed.
12
Technical description
Chapter 5
Advertisement
Table of Contents
