Preparation For Network Connection (For Administrators); Checking A Lan Cable For Connection; Assigning An Ip Address - Konica Minolta bizhub c3110 Quick Start Manual

5
5 Initial Settings of This Machine
5.1

Preparation for network connection (for administrators)

Checking a LAN cable for connection

Check that a LAN cable connected to the network is connected to the LAN port of this machine.
For details on the cable connection port, refer to page 3-3.

Assigning an IP address

If this machine has a fixed IP address, manually enter the IP address, subnet mask, and default gateway ad-
dress.
In the Control Panel, select [UTILITY] - [Admin Settings] - [ETHERNET] - [TCP/IP] - [IPv4 Settings], then con-
figure the following settings.
Settings
[IP ADDRESS]
[SUBNET MASK]
[DEFAULT GATEWAY]
[IP App Auto Setg]
Tips
- To check the IP address assigned to this machine, print out the Configuration Page. To print out the
Configuration Page, select [REPORT/STATUS] - [REPORT] - [Configuration Page] on the main screen.
5-2
Preparation for network connection (for administrators)
Description
When manually specifying the IP address, enter the fixed IP address assigned
to the machine.
When manually specifying the IP address, enter the subnet mask.
When manually specifying the IP address, enter the default gateway.
When automatically specifying the IP address, select the method for automatic
retrieval.
• [DHCP]: [ON] is specified by default.
• [BOOTP]: [OFF] is specified by default.
• [ARP/PING]: [OFF] is specified by default.
• [AUTO IP Settings]: Fixed to [ENABLE].
5.1
[Quick Start Guide]