Configuring Smart Scan Tm; Installation - Octava HDHC44MX-V1.3 Installation Manual

Configuring Smart Scan
The Smart Scan is disabled before shipment. It is
recommended to leave Smart Scan disabled in most
applications.
To enable the Smart Scan
To disable Smart Scan

Installation:

1) Verify that the Configuration Switch is in the factory default mode.
2) Connect the DC power adapter
3) Connect the Monitors.
HDMI-If you are connecting HDTV with HDMI, simply connect
the HDMI cable
CAT5/6 -If you are connecting using the RJ-45 CAT 5/6 output,
you must use a HDMI-CAT 5/6 Receiver.
4) Connect the HDMI sources to the HDMI INPUTS
5) Turn On your HDTV and at least 1 HD source
1) Set the Configuration switch #1 to the up position.
2) Re-power the matrix.
TM
1) Set the Configuration switch #1 to the down position.
2) Re-power the matrix.
SCAN=ON
TM
:
TM
4
SCAN=OFF