Power Up - Lorex LZV1722 Instruction Manual

1 Using the On-Screen Display (OSD) Menu
To set PTZ speed:
1. Launch the OSD menu. Use the on-screen arrow keys to navigate to FUNCTION SET-
TING and click Enter.
2. Select NEXT PAGE and click Enter.
3. Under PTZ SPEED, use the left / right arrows to set the PTZ speed between 1 (slow-
est) and 5 (fastest).

1.4.9 Power Up

Choose an action for the PTZ camera to perform when it first powers up.
To configure power up settings:
1. Launch the OSD menu. Use the on-screen arrow keys to navigate to FUNCTION SET-
TING and click Enter.
2. Select NEXT PAGE and click Enter.
3. Under POWER UP, use the left / right arrows to set the camera's function upon startup:
• AUTO: Camera performs default diagnostics check on startup.
• PRESET: Camera moves to a preset location on startup. Under PARAMETER, use
the left / right arrows to set the preset number (1–300).
• SCAN: Camera performs a scan cycle on startup. Under PARAMETER, use the left
/ right arrows to set the scan number (1–5).
• TOUR: Camera performs a tour on startup. Under PARAMETER, use the left / right
arrows to set the tour number (1–8).
• PATTERN: Camera performs a pattern on startup. Under PARAMETER, use the left
/ right arrows to set the pattern number (1–5).
• NONE: Camera performs no action on startup
#LX400027; r. 1.0/16996/16996; en-US
28