Pattern - Lorex LZV1722 Instruction Manual

1 Using the On-Screen Display (OSD) Menu
5. Configure the following:
• Select 01 under the NO column and click Enter to configure the first preset location
in the tour.
• Use the left / right arrows to select PRESET. Use the up / down arrows to choose
the number of the first preset location in the tour.
• Use the left / right arrows to select DWELL. Use the up / down arrows to set the
length of time the camera will spend at the first preset location.
• Use the left / right arrows to select SPEED. Use the up / down arrows to set how fast
the camera moves into the first preset location (001=slowest; 016=fastest).
6. When you are finished configuring the first point in the tour, click Enter. Repeat step 5
for as many points as you want to set in the tour. A single tour can use up to 32 preset
locations.
Note
If you wish to test the tour, select CALL and click Enter. The camera will begin touring. To stop the test,
select STOP and click Enter.
To delete a tour:
1. Select the number of the tour you want to delete under TOUR NO.
2. Select DELETE and click Enter.

1.4.5 Pattern

Patterns automatically cycle the camera between two positions. You can set up to 5
patterns.
#LX400027; r. 1.0/16996/16996; en-US
25