Aastra 7434IP User Manual page 27

IP P MX-ONE™
HONE FOR
2.12
27
Answer a call
Make a call
Switch from headset 
to handset
Switch from handset 
to headset
Clear a call
Change volume
By default, the phone is set to connect calls to the loudspeaker. If you
are using a headset, you can switch to the headset preset mode to have
calls connected to the headset instead.
Activate Headset Preset Press
Deactivating Headset
Preset Mode
Note: When you lift the handset, the call is always connected to the
handset, regardless of the type of preset setting. Activation and
deactivation of Headset Preset can only be done when the
phone is in idle mode.
Option Unit (Optional)
It is possible to install an option unit in the phone. An option unit, which
is built into the foot console, provides the phone with the following extra
features:
• Gigabit Ethernet
• Extra bell and busy signal
Press .
Press and dial the desired number. In
headset preset mode, you are not required
to press the headset key.
Lift the handset.
Press and replace the handset.
Press the Clear softkey or
Press
The new volume setting is stored.
and hold for at least 4 seconds.
A short acknowledgement signal is heard.
Press and hold for at least 4 seconds.
A short acknowledgement signal is heard.
6/1553-DBC 434 01 Uen B3 2010-01-26
.
to change the volume.