Fisher & Paykel WashSmart Installation Instructions And User Manual page 37

Changing pre-set options
US
36
CA
Factory reset
You can reset your washer to the settings it left the factory with:
Enter Option Adjustment mode (refer to page 32).
1
Select the ALLERGY cycle.
2
The display will show "rSt". Touch and hold START/PAUSE for 3 seconds to reset your washer to its
3
factory settings.
Note: this action will reset the washer to the default settings. Touch POWER to exit if you do not
wish to reset your washer at this time.
Fig.38 Changing the washer back to the factory default settings
Remember, to save changes and exit from the Option Adjustment mode (ie to return to normal
operating mode), touch the POWER button.