Changing Pre-Set Options - Fisher & Paykel WashSmart Installation Instructions And User Manual

Changing pre-set options

US
32
CA
Option Adjustment mode
After using your washer a number of times you may want to fine tune some of the options to
suit your wash needs.
There are a number of pre-set options which can be altered:
Changing the COLD wash temperature to CONTROLLED COLD.
1
The out of balance recovery routine.
2
The number of beeps at the end of the cycle.
3
Resetting to factory default settings.
4
To enter Option Adjustment mode
Turn machine on at the power outlet but do not touch
1
POWER.
Touch and hold the KEYLOCK and START/PAUSE buttons
for 3 seconds. You will hear 3 quick beeps indicating you
have entered Option Adjustment mode. The machine will
show the default setting for the COLD wash temperature.
The diagram on page 33 shows how the wash cycle
icons relate to the options you can change.
Pages 34 – 36 explain the different options in more detail.
Use the buttons on the panel to make your changes to the
2
pre-set options.
Press POWER to return to normal mode. Your washer will
3
automatically remember your changes.
Fig.32 Entering Option
Adjustment mode