Using Your Washer - Fisher & Paykel WashSmart Installation Instructions And User Manual

Using your washer

The SmartTouch™ buttons require only a gentle touch to activate.
Touch POWER to activate your Fisher & Paykel WashSmart washer.
1
Select your desired wash cycle by touching the corresponding button (refer to page 25).
2
Choose your wash options, eg you may want a WARM wash temperature and a SLOW spin speed
3
(refer to pages 26 – 30).
Touch START/PAUSE to start the cycle. The washer will start to fill with water and select the
4
correct wash action for your load.
For best fabric and color care, remove your clothes as soon as the cycle has finished.
Use KEYLOCK mode to lock the buttons on the display, which prevents them from being
5
activated accidently by a laundry basket or little fingers (refer to page 18).
DELAY START allows you to delay the start of your wash by 5 mins up to 18 hours (refer to page 29).
6
6
If you wish to stop your WashSmart washer
Press START/PAUSE.
During a spray rinse or spin, there will be a slight delay while the basket slows to a stop and the
lid is unlocked.
Important!
Failure to follow the advice in this guide may result in damage to your garments, and your
expectations of wash performance may not be met.
Getting started quickly
3 4
US
17
CA