Technical Data; Specifications - Rinnai RUR98i Installation And Operation Manual

Specifications

Minimum Gas Consumption Btu/h
Maximum Gas Consumption Btu/h
Hot water capacity (Min - Max) *
Maximum Temp Setting
Minimum Temperature Setting
Weight
Energy Factor
Noise level
Electrical Data
By-Pass Control
Gas Supply Pressure
Type of Appliance
Connections
Ignition System
Electric Connections
Water Temperature Control
Water Supply Pressure
Maximum Water Supply Pressure
Remote Control Cable
Energy Star Qualified
Certified for installation in manufactured (mobile) homes
Complies with South Coast Air Quality Management District
14 ng/J or 20 ppm NOx emission levels
* Minimum flow may vary slightly depending on the temperature setting and the inlet water temperature.
Minimum activation flow is 0.4 GPM (1.5 L/min).
Our products are continually being updated and improved; therefore, specifications are subject to change without prior notice.
The maximum inlet gas pressure must not exceed the value specified by the manufacturer. The minimum value listed is for the
purpose of input adjustment.
52

Technical Data

Normal
Standby
Anti-frost Protection
Fuse
Natural Gas
Propane
KBP Series Manual
RUR98i
(1.0 - 37 L/min)
Selectable at 120° F (49° C) or at 140° F (60° C)
For Dedicated Return mode: 98° F (37° C),
For Cross Over mode : 120° F (49° C)
0.95
41dB
205W
150W
4.0 - 10.5 inch W.C.
8.0 - 13.5 inch W.C.
Condensing, Tankless, Temperature controlled continuous flow gas hot
Gas Supply: 3/4" MNPT, Cold Water Inlet: 3/4" MNPT, Hot Water Outlet:
Direct Electronic Ignition
Appliance: AC 120 Volts, 60Hz.
Temperature Controller: DC 12 Volts (Digital)
Simulation Feedforward and Feedback
Minimum Water Pressure: 50 PSI (Recommended 60-80 PSI for maximum
Non-Polarized Two Core Cable (Minimum 22 AWG)
RUR98e
15,200
199,000
0.26 - 9.8 GPM
72.8lb (33kg)
0.95
52dB
201W
3W
210W
10 A
Electronic
water system
3/4" MNPT
performance)
150 PSI
Yes
Yes
Yes