Technical Data; Specifications - Rinnai V Model Series Installation And Operation Manual

Specifications

Minimum Gas Consumption Btu/h
Maximum Gas Consumption Btu/h
Hot water capacity (Min - Max) *
Temperature Settings (without temperature controller)
Temperature Controller Default Setting
Maximum Temp Setting (residential)
see Temperature Ranges for more information
Minimum Temperature Setting
Weight
Noise level
Normal
Standby
Electrical Consumption Anti-frost Protection
Max Current
Fuse
By-Pass Control
Natural Gas
Gas Supply Pressure
Propane
Type of Appliance
Connections
Ignition System
Electric Connections
Water Temperature Control
Water Supply Pressure
Maximum Water Supply Pressure
Remote Control Cable
Certified for installation in manufactured (mobile) homes
NOx
* Minimum flow may vary slightly depending on the temperature setting and the inlet water temperature.
Minimum activation flow is 0.6 GPM (1.5 L/min).
Our products are continually being updated and improved; therefore, specifications are subject to change without prior notice.
The maximum inlet gas pressure must not exceed the value specified by the manufacturer. The minimum value listed is for the purpose of input
adjustment.

Technical Data

120° F (49° C), default or 140° F (60° C)
Temperature controlled continuous flow gas hot water system.
Gas Supply: 3/4" MNPT, Cold Water Inlet: 3/4" MNPT, Hot Water Outlet: 3/4"
Appliance: AC 120 Volts, 60Hz. Remote Control: DC 12 Volts (Digital)
Simulation Feedforward and Feedback.
Minimum Water Pressure: 20 PSI (Recommended 30-80 PSI for maximum
Non-Polarized Two Core Cable (Minimum 22 AWG)
Complies with South Coast Air Quality Management District 40 ng/J
V53De Manual
V53De
15,500 (LP & NG Both)
120,000
0.4 - 5.3 GPM (1.5 - 20.0 L/min)
115° F (46° C)
140° F (60° C)
115° F (46° C)
29.7 lb. (13.5 kg)
54 dB
50W
2 W
64W
1.2A
5A
Fixed
4.5 - 10.5 inch W.C.
8.0 - 13.5 inch W.C.
MNPT
Direct Electronic Ignition
performance)
150 PSI
Yes
NOx emission levels
17