Technical Data; Specifications - Rinnai REU-VA1320WF-US Operation And Installation Manual

Specifications

Model
Minimum Gas Consumption Btu/h
Maximum Gas Consumption Btu/h
First Hour Rating
Storage Tank Volume
Recovery (100° Rise)
Temperature Selections
Maximum Temp Setting
Minimum Temperature Setting
Weight
Noise level
Electrical Consumption
Minimum Gas Supply
Pressure
Maximum Gas Supply
Pressure
Type of Appliance
Approved Gas Type
Connections
Ignition System
Electric Connections
Water Temperature Control
Water Supply Pressure
Maximum Water Supply Pressure
Sensor and Switches
Rinnai is continually updating and improving products. Therefore, specifications are subject to change without
prior notice.
The maximum inlet gas pressure must not exceed the value specified by the manufacturer. The minimum value
listed is for the purpose of input adjustment.
28

Technical Data

Standby
Operation
Fuse
Natural Gas
Propane
Natural Gas
Propane
Natural Gas or Propane - Ensure unit matches gas type supplied at the installation location.
Natural Gas: 59,500 BTU/Hr
Natural Gas: 91,300 BTU/Hr
Automatic Circulating Tank Water Heater
Cold Water Inlet: 3/4" MNPT,
Hot Water Outlet: 3/4" MNPT
Appliance: AC 120 Volts, 60Hz.
Simulation Feedforward and Feedback.
Minimum Water Pressure: 20 PSI (Recommended 30-50 PSI for maximum performance)
RH180 Manual
RH180
Propane: 47,600 BTU/Hr
Propane: 87,300 BTU/Hr
180 GPH
40 gallons
89 GPH
110, 120, 130, 135, 140
140º F (60º C)
110º F (43º C)
150lb (68kg)
50 dB
3 Watts
150 Watts
5 Amps
4.0 inch W.C.
8.0 inch W.C.
10.5 inch W.C.
13.5 inch W.C.
Category 1, Fan Assisted
Gas Supply: 1/2" MNPT,
Direct Electronic Ignition
150 PSI
Flammable Vapor Sensor
Combustion Air Co Sensor
Bi-Metal Overheat Switch