Table of Contents
Advertisement
I
NSTALLATION
EAS D
EACTIVATION
SW1 and SW2 are the switch banks inside the Checkpoint device that set the deactivation range. The following is a list of
Checkpoint recommended switch bank settings.
All MS2421/MS2422 models have a connector labeled EAS In on the bottom of the unit. Metrologic has an optional EAS cable
(
52-52511x) available for purchase for connection between the Checkpoint device and the MS2421/MS2422 scanner.
MLPN
The following figure shows the location of the EAS deactivation area for the MS2421/MS2422 scanner. It is important to pass
the entire tag through this area to deactivate the security tag.
24
Base Model
Checkpoint Recommended Switch Bank Settings
MS2421
SW1 & SW2 switches 1 and 6 set to ON
MS2422
SW1 & SW2 switches 1 and 6 set to ON
Figure 23. EAS Cable Connection (Bottom of MS2421/MS2422)
Figure 24. EAS Deactivation Area
Advertisement
Table of Contents
