Table of Contents
Advertisement
I
NSTALLATION
EAS D
EACTIVATION
SW1 and SW2 are the switch banks inside the Checkpoint device that set the deactivation range. The following is a list of
Checkpoint recommended switch bank settings.
Base Model
Checkpoint Recommended Switch Bank Settings
MS2122
SW1 & SW2 switches 1 and 6 set to ON
The StratosE has a connector (marked EAS In) on the bottom of the scanner. Metrologic has an optional EAS cable
(
52-52511A) available for purchase for connection between the Checkpoint device and the StratosE.
MLPN
Figure 23. EAS Cable Connection (Bottom of StratosE)
The following figure shows the location of the EAS deactivation area for Stratos
. It is important to pass the entire tag through
E
this area to deactivate the security tag.
Figure 24. EAS Deactivation Area
18
Advertisement
Table of Contents
