Eas Deactivation - Metrologic MS2020 Stratos Installation And User Manual

I
NSTALLATION
EAS D
EACTIVATION
SW1 and SW2 are the switch banks inside the CheckPoint Device that set the
deactivation range. The following is a list of CheckPoint recommended switch
bank settings.
Base Model
MS2020
MS2021
MS2022
All models have a connector (marked EAS In) on the bottom of the scanner.
Metrologic has available for purchase an EAS cable for connection between the
scanner/scale and the Checkpoint Device (optional accessory,
The following figure shows the location of the EAS deactivation area for Stratos.
It is important to pass the entire tag through this area to deactivate the security
tag.
CheckPoint Recommended Switch Bank Settings
SW1 & SW2 switches 1 and 6 set to ON
SW1 & SW2 switches 1 and 6 set to ON
SW1 & SW2 switches 1 and 6 set to ON
Figure 40. EAS Cable Connection (Bottom of Stratos)
52-52511A).
MLPN
53