Tesla Powerwall Installation And User Manual page 13

8. Remove the pallet back. The mounting cleat on the back of Powerwall should now be visible,
and extend past the edge of the box for easy installation.
9. Verify that the box contains the following items:
• Powerwall
• Wall mount bracket (wall mounting fasteners are not included)
• Two side covers
• Two M6, 10 mm external hex bolts for the wall mount bracket side tabs (plus one spare
bolt for side tabs or bottom cover)
• Spare M4, T20 bolt (if needed for splash cover)
If any parts are damaged or missing, contact the Tesla Energy Authorized Reseller or Tesla
Energy Certified Installer. If any damage is detected, address high voltage and other safety
risks immediately. Do not continue the installation procedure.
10. Remove the wall mount bracket from its foam padding on the inside face of the pallet.
Step-by-Step Installation Instructions
Step-by-Step Installation Instructions
11