Alarm - PEUGEOT 208 Handbook

Alarm

The alarm provides the following types of monitoring:
Monitoring
- Exterior perimeter
The system checks for opening of the vehicle.
The alarm is triggered if anyone tries to open a
door, the boot, the bonnet...
- Interior volumetric
The system checks for any variation in the
volume in the passenger compartment.
The alarm is triggered if anyone breaks a
window, enters the passenger compartment or
moves inside the vehicle.
Self-protection function
The alarm is triggered if the battery, the central
control or the wires of the siren are put out of
service or damaged.
For all work on the alarm system, contact a
PEUGEOT dealer or a qualified workshop.
Total
Operation
Armed
F Switch off the ignition and get out
of the vehicle.
F Press the locking button on the
remote control.
The alarm monitoring system is active: the
indicator lamp in the button flashes once per
second.
Timing:
The exterior perimeter monitoring is activated
after a delay of 5 seconds.
The interior volumetric monitoring after a delay
of 45 seconds.
If an opening (door, boot...) is not closed
fully, the vehicle is not locked but the exterior
perimeter monitoring will be activated after a
delay of 45 seconds at the same time as the
interior volumetric monitoring.
29
Access and starting
Disarmed
F Press the unlocking button on
the remote control.
The alarm system is switched off: the
indicator lamp in the button goes off.
Automatic arming (depending on version)
Monitoring is active 2 minutes after the last
door or the boot is closed.
F To avoid triggering the alarm on entering
the vehicle, first press the button on the
remote control before opening a door.
Perimeter
Operation
Deactivate the interior volumetric monitoring
to avoid unwanted triggering of the alarm in
certain cases such as:
- leaving a pet in the vehicle,
- leaving a window partially open,
- washing your vehicle.
2