Switching Off - PEUGEOT 208 Handbook

Switching off

Ignition
Procedure - Gearbox
Manual
F Place the gear lever in neutral.
F Immobilise the vehicle.
F Apply the parking brake.
F Turn the key towards you to position 1 (Stop).
F Remove the key from the ignition switch.
Electronic
F Place the gear lever at position N.
F Immobilise the vehicle.
F Apply the parking brake.
F Turn the key towards you to position 1 (Stop).
F Remove the key from the ignition switch.
Automatic
F Place the gear lever at position P or N.
F Immobilise the vehicle.
F Apply the parking brake.
F Turn the key towards you to position 1 (Stop).
F Remove the key from the ignition switch.
Coasting
As a safety measure, do not coast
(free-wheeling in neutral or with the
clutch pedal depressed).
Switching off the engine leads to a loss
of braking assistance.
Steering wheel
To facilitate unlocking of the steering
wheel, it is recommended that you
place the wheels in the straight ahead
position before switching off the engine.
15
Access and starting
Key left in the "Ignition on"
position
On opening the driver's door, an alert
message is displayed, accompanied by an
audible signal, to remind you that the key is
still in the ignition switch at position 1 (Stop).
If the key has been left in the ignition
switch at position 2 (Ignition on),
the ignition will be switched off
automatically after one hour.
To switch the ignition back on, turn the
key to position 1 (Stop), then back to
position 2 (Ignition on).
2