Alarm - PEUGEOT 301 Handbook

Access

Alarm

System which protects and provides a deterrent
against theft and break-ins. It provides
perimeter protection and a self-protection
function.
Perimeter protection
The system checks for opening of the vehicle.
The alarm is triggered if anyone tries to open a
door, the boot, the bonnet, etc.
Self-protection function
The system checks for the putting out of
service of its components.
The alarm is triggered if the battery, the
central control or the siren wiring are put
out of service or damaged.
For all work on the alarm system, contact
a PEUGEOT dealer or a qualified
workshop.
32
Locking the vehicle with
alarm
Activation
F Turn the vehicle off and exit.
F Press the locking button on the
remote control.
The alarm is activated: an indicator
lamp in the switch panel to the left of
the steering wheel flashes once per
second.
The perimeter protection is activated 5 seconds
after pressing the locking button on the remote
control.
If an opening (door, boot, etc.) is not closed
fully, the vehicle will not be locked, but the
alarm will be activated.
Deactivation
F Press the unlocking button on
the remote control.
The alarm is deactivated: the
indicator lamp goes off.
Triggering of the alarm
This is indicated by sounding of the siren and
flashing of the direction indicators for thirty
seconds.
When the vehicle is unlocked using
the remote control, rapid flashing of
the indicator lamp informs you that
the alarm was triggered during your
absence. Upon ignition, this flashing
stops immediately.
Locking the vehicle without
activating the alarm
F Lock the vehicle using the key.
Failure of the remote control
To deactivate the monitoring functions:
F Unlock the vehicle using the key.
F Open the door; this sets off the alarm.
F Switch on the ignition; this stops the alarm.
Operating fault
When the ignition is switched on, continuous illumination
of the indicator lamp indicates a fault with the system.
Have it checked by a PEUGEOT dealer or a qualified
workshop.