Speed Limiter - PEUGEOT 208 Handbook

Driving

Speed limiter

"LIMIT"
Steering mounted controls
1. Speed limiter mode selection / off.
2. Increase the registered speed setting.
3. Decrease the registered speed setting.
4. Speed limiter On / Pause.
Principle
"This is the speed that the driver does not want
to exceed".
The speed setting is selected with the engine
running, stationary or when driving. The
minimum speed setting possible is 20 mph
(30 km/h).
The vehicle responds to the accelerator until
resistance is felt in the pedal, which signifies
that the vehicle has reached the limiter speed
setting.
However, the limit speed can be exceeded by
pressing the accelerator pedal beyond the point
of resistance; simply release the accelerator
pedal to return to a speed below the limiter
setting.
Setting and operation of the system can be
done stationary with the engine running or
when driving.
Operation
Selection
F Place the thumb wheel at the "LIMIT"
position: the speed limiter mode is selected
but is not switched on (PAUSE).
You do not have to switch the speed limiter on
in order to set the speed.
126
Registering a limit speed
This can be done without switching the limiter
on, but the engine must be running.
To register a speed higher than the previous
setting.
- Press the SET + button.
A short press increases the setting in steps of
1 mph (km/h).
Pressing and holding increases the setting in steps
of 5 mph (km/h).
To register a speed lower than the previous setting.
- Press the SET - button.
A short press decreases the setting by
1 mph (km/h).
Pressing and holding decreases the setting in
steps of 5 mph (km/h).