PEUGEOT 208 Handbook page 100

Comfort
This seat can be used on seats not fitted with ISOFIX mountings.
In this case, it must be attached to the vehicle's seat using the three-point seat belt.
Adjust the front seat of the vehicle so that the child's feet do not touch the backrest.
Follow the instructions for fitting child seats contained in the seat manufacturer's installation guide.
RÖMER Duo Plus ISOFIX (size category B1)
Group 1: from 9 to 18 kg
Is attached to the rings A and the upper ring B, referred to as the Top Tether,
Three seat body angles: sitting, reclining, lying down.
FAIR G 0/1 S and its base RWF B ISOFIX (size category C)
Group 0+ and 1: from birth to 18 kg
Is installed using an ISOFIX base attached to the rings A.
Use the type B ISOFIX base rearward facing (RWF).
This child seat can also be used in the forward facing position on seating positions
In this case, the child seat body must be attached to the seat of the vehicle by
98
Is installed in the forward facing position.
using an upper strap.
Is installed rearward facing.
6 seat body angles.
not fitted with ISOFIX mountings.
the three point seat belt.