Automatic Illumination Of Headlamps - PEUGEOT 208 Handbook

Hide thumbs Also See for 208:
Table of Contents

Advertisement

AUTO mode
The sidelamps and dipped beam headlamps are
switched on automatically, without any action
on the part of the driver, when a low level of
ambient light is detected or in certain cases of
activation of the windscreen wipers.
As soon as the brightness returns to a sufficient
level or after the windscreen wipers are switched
off, the lamps are switched off automatically.
Switching on
F Turn the ring to the "AUTO" position.
Activation of the function is accompanied
by a message in the screen.
Switching off
F Turn the ring to another position.
Deactivation of the function is
accompanied by a message in the screen.
Automatic guide-me-home
lighting
Association with the automatic lighting provides
the guide-me-home lighting with the following
additional options:
-
selection of the lighting duration of 15, 30
or 60 seconds,
-
automatic activation of guide-me-home
lighting when the automatic illumination of
headlamps is in operation.
Configuration
Switching on
Press "MENU" to display the "MAIN
MENU".
Select "Driving".
Select "Secondary page".
Select "Vehicle settings".
Select the "Driving assistance" tab.
Activate the "Guide me home"
function.
149
Lighting and signalling
Switching off
Deactivate the "Guide me home"
function.
In the event of a fault with the
sunshine sensor, the lighting comes
on, this warning lamp is displayed
in the instrument panel and/or a message
appears in the screen, accompanied by an
audible signal.
Contact a PEUGEOT dealer or a qualified
workshop.
In fog or snow, the sunshine sensor
may detect sufficient light. In this
case, the lighting will not come on
automatically.
Do not cover the sunshine sensor,
coupled with the rain sensor and
located in the centre of the windscreen
behind the rear view mirror; the
associated functions would no longer
be controlled.
6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents