PEUGEOT 208 Handbook page 349

Creep function
Depending on the engine, the vehicle moves without pressing the accelerator.
Assistance with low-speed
manoeuvres
With the engine running at idle, parking brake
released and the lever placed at A , M or R , the
vehicle moves off when your release the brake
pedal.
It stops on opening the driver's door. Closing
the door, and putting your foot on the brake
or accelerator pedal allows movement of the
vehicle again.
Advice
Following disconnection of the battery, you
have to reinitialise the gearbox.
Switch the ignition on.
AUTO and - appear in the instrument
panel.
Select position N .
Press the brake pedal firmly.
Wait around 30 seconds until N or a gear
appears in the instrument panel.
Release the brake pedal.
The gearbox is operational again.
115
With the ignition on, the
illumination of this warning
lamp and the flashing of AUTO ,
accompanied by an audible
signal and a message in the
screen, indicate a gearbox fault.
Have it checked by a PEUGEOT dealer or a
qualified workshop.
Driving
5