PEUGEOT 208 Handbook page 204

Practical information
Reinitialising
It is necessary to reinitialise the system every
time one or more tyre pressure is adjusted, and
after changing one or more wheels.
A label attached to the middle pillar, driver's
side, gives a reminder of this.
Before reinitialising the system, ensure
that the pressures of the four tyres are
correct for the use of the vehicle and in
line with the recommendations on the
tyre pressure label.
The under-inflation detection system
does not give a warning if a pressure is
incorrect at the time of reinitialisation.
Before doing anything to the system,
the pressures of the four tyres must be
checked and the system reinitialised.
Touch screen
Reinitialisation of the system is done with the
ignition on and the vehicle stationary.
From the "Driving assistance" menu
of the touch screen:
F Press "Under-inflation
initialisation".
F Confirm the instruction by pressing "Yes",
an audible signal and a message confirm
the reinitialisation.
The new pressure settings registered
are considered to be reference values
by the system.
202
Screen A
F With the ignition on and the
vehicle stationary, press this
button for about 3 seconds then
release it, an audible signal
confirms the reinitialisation.
Operating fault
The flashing and then fixed illumination of the
under-inflation warning lamp accompanied
by illumination of the Service warning lamp
indicates a fault with the system.
In this case, under-inflation monitoring of the
tyres is no longer assured.
Have the system checked by a PEUGEOT
dealer or a qualified workshop.