Asus R300 User Manual page 71

• POI: opens the list of POIs near the selected point. These are the POIs shown in the
Popup Info window. This menu point is only available on the Map screen. If you want to
add a new POI at the cursor, you can do so by tapping Add POI in the bottom left corner.
You can also add a new road safety camera if you tap Add Cam, and set the parameters
(type, direction, and speed). If a camera already exists near the cursor, this button is
inactive, and you can change the parameters of the camera by tapping it in the list.
Current street (No. 1)
This field of the Cockpit screen shows the name or number (as available) of the current
street or road you are driving on.
Tip: Some roads have an alternative name (or number). This is normally shown together
with the primary name in this field. You can hide these alternative names in Map settings.
Travel and Route data (No. 1)
The contents of these three fields are different when cruising (without an active route) or
navigating (following an active route).
While cruising, the fields show the present speed, the current speed limit and the time of
day.
While navigating a route, these fields show the estimated time needed to reach the
destination (ETE), the distance to destination, and the estimated arrival time at the
destination (ETA) by default.
1