Time Synchronization - Asus R300 User Manual

Time synchronization

In the top right corner of the screen you have another button that leads to a new screen
where you can synchronize the clock of your PNA to the very accurate time provided by the
connected GPS.
Turn on the Auto Correction switch to let ASUS GO frequently check and correct the internal
clock of the device with the GPS time.
Below that button you will see the current values of the GPS and the device clocks. You can
check here whether any correction is needed. Tap the downward arrow button to manually
synchronize the time.
Below the PNA time you have hour and minute controls to manually correct the time
with or without a valid GPS time. It also gives you the chance to correct the time after
synchronization if your PNA does not support time zones or daylight saving time.