Find; Find & Go (Main Menu) - Asus R300 User Manual

. Find

One of the most frequently used functions of ASUS GO is selecting the destination. Once
you have the destination, you can start navigating. Getting to this point should be as fast
as possible. ASUS GO provides you with a versatile search engine designed to find your
chosen destination after only a few taps on the screen.
Note: If you select a location in any part of the Find system, you will normally drop back
to the map screen, where you will have several possible actions (set as start, set as
destination, add as via point, continue route with, mark with a pin, add it to the database of
road safety cameras, or add as a POI item). However, if you enter the Find system using
the Find & GO button, ASUS GO will immediately put you into Cockpit mode and start
navigation.
Tip: If you want to plan a route that starts from a place other than your current position, set
Off-route Recalculation to Disabled in Settings / General Settings (Page 65) or turn off GPS
with the GPS button on the GPS screen.
..1 Find & GO (Main menu)
As just mentioned, the fastest way to find your destination and start navigating is to tap Find
& GO in the Main menu. This will put you on the Find screen, and as soon as you pick a
destination, ASUS GO will immediately show the Cockpit screen and start navigation. This
means that if you plan your route to one of your Favourite destinations, you only need two
taps to start navigating.
11