Asus R300 User Manual page 123

Method
Use the handle to set the speed of the route calculation. In the leftmost position the route
may not be optimal but the calculation will be very fast. Sliding it to the right will result in
more accurate routing in an increased amount of time.
Note: Since ASUS GO calculates routes very quickly, the position of this slide is only
used for long routes. Short routes are always calculated to give you the optimal result
independent of the slider.
Route
Here you can choose from three different route types.
Short
Choosing Short will result in a route that has the smallest total distance of all possible routes
between the given points. This is usually preferred by pedestrians, cyclists or slow vehicles.
Fast
Choosing Fast will result in the quickest possible route, given that you can travel at or near
the speed limits on all included roads. This is usually preferred for fast and normal cars.
Economical
This setting is a wise combination of the previous two. Although basically going for the
fastest solution, if there is another route taking a bit more time but a lot less distance
compared to the fastest one, ASUS GO will choose this one instead to save fuel.
1