Asus R300 User Manual page 162

Look for a small, red 'N' letter on the compass icon or an aeroplane icon instead of it.
It is likely that you had initiated the North-up map orientation or the Overview mode
unintentionally. Tap this icon to revert to Track-up mode with automatic map rotation.
Creating a multi-point route I have tapped the 'Route To' button once for each destination but
only the last one appears in the list, all previous points have disappeared.
The 'Route To' button is for starting a new route only. For a single route you tap this when
the destination is selected. Multi-point routes can be created after you have established a
single route. Add points to the single route by using the 'Add Via' and 'Continue' buttons.
Applying 'Route To' again will delete the whole route. In your case only single routes existed
before, so they were deleted without a warning message. If you already have a multi-point
route, ASUS GO warns you before deleting the whole route.
I enabled the speed warning as soon as I bought the product but I have just been fined for
speeding because ASUS GO failed to warn me.
For an accurate speed warning the actual speed limits of each street and road must be
present correctly on the map. This is a relatively new feature of digital maps, so it may not
be available in some countries, and its accuracy still has much room for improvement (ask
your local dealer for the details in your region). This feature can help you in several cases
but it cannot be considered as serious speed control. That is why it can be turned on and off
separately from the reliable voice guidance.
1